欢迎进入沈阳行晋科技有限公司网站!
024-88338111
网站新时时彩-注册
公司简介
产品展示
产品领域
成功案例
资质荣誉
公司动态
人才招聘
在线留言
联系我们
联系我们
  • 地址 : 沈阳市大东区上园路43甲号7门
  • 邮编 :100006
  • 电话 : 024-88338111
  • 传真 : 024-88334111
  • 热线电话 : 024-88338111

产品展示

  • JET.L 2018-09-26新时时彩-注册

    JET.L
    JET.L is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as:
    Tenoning / Finger Jointing / Drilling
    Mortising / Milling / 4/5 axis profiling
  • JET 2018-09-26

    JET
    JET is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as:
    Tenoning / Finger Jointing / Drilling
    Mortising / Milling / 4/5 axes profiling.
  • JET.LINER 2018-09-26新时时彩-注册

    JET.LINER
    JET.LINER is a machining center with 5 interpolated axes ideal for machining elements for doors and frames and straight elements with a section up to 250x100mm. 
  • CSF2 2018-09-25新时时彩-注册

    CSF2
    DOUBLE.CSF2, double machining center with 5+5 interpolated axes, numerically controlled, is designed for:
    Tenoning / Finger Jointing
    Boring / Mortising
    Milling
    4/5 axes profiling
    Both at the ends of the elements and between the ends themselves.
  • JET 2018-09-25新时时彩-注册

    JET
    DOUBLE.JET is a double machining center with 6+6 interpolated and numerically controlled axes, equipped with an automatic loading/unloading system.
  • EVOLUTION 2018-09-25

    EVOLUTION
    EVOLUTION is a double machining center equipped with two independent operating units with 5+5 interpolated axes, to perform machining on the same piece with both heads or two different pieces at the same time.
  • EVO. JET 2018-09-25新时时彩-注册

    EVO. JET
    EVOLUTION.JET is a highly flexible machining center both in terms of sizes customization and in terms of the number of working tables that can be fitted with equipment for manual, semi-automatic or fully automatic loading and unloading.
  • EVOJET.LINER 2018-09-25新时时彩-注册

    EVOJET.LINER
    The EVOJET.LINER double head, numerically controlled machining center, equipped with two independent working tables, 4 or more reinforced clamps per table and an automated loading/unloading system, is extremely well-suited to the production of elements for doors in batch 1, also thanks to the PITAGORA  parametric programming software, the automatic reading of blank size, to sawing unit and to the fast positioning of the motorized clamps.